Installation of skirting line and University quest

2022-07-22
  • Detail

Skirting refers to the decoration materials installed at a small section of the connection between the ground and the wall. Although the installation of skirting is only a small link in indoor decoration, it is also a big problem for residents to pay attention to. What should we pay attention to when installing the skirting line? Today we will learn about it through the following content

skirting refers to the decoration materials installed at a small section of the connection between the ground and the wall. Although the installation of skirting is only a small link in indoor decoration, it is also a big problem for residents to pay attention to. What should we pay attention to when installing the skirting line? Today we will learn about it through the following content

skirting line installation, installation method: the installation method of skirting lines of different materials may be different, but the basic points of installation are the same. The general process is to level the wall, measure, prepare the skirting line, cut the skirting line, install and fix the skirting line, etc. The big difference between different installation methods lies in the different methods of fixing the skirting line, some are adhesive, some are fixed with nails, etc

installation of skirting line, step 1. During the installation of skirting line, certain measurements need to be made, mainly the measurement of wall and skirting line. Generally speaking, the length of the skirting line used in each area is different, so the length of the skirting line required in each section is measured and then marked on the skirting line

skirting line installation, step 2. Use tape measure, pencil, etc. to determine the required length of skirting line, and then use sawtooth and other tools to cut

skirting line installation, step 3. Drill holes in the wall with special tools. Before drilling, observe whether there are water and electricity lines in the wall to prevent errors. The common length of the skirting line is 2m. In order to fix the skirting line more firmly, the interval of drilling holes should be about 40cm, and the interval at the interface should be smaller. After drilling the hole, nail the small wooden strip into the hole, and the nail fixing the skirting line is nailed to the wooden strip. The reason why it is not directly nailed to the wall is mainly to prevent the nail from loosening

reminder: since the pipes of hydropower projects are buried on the wall, the position of the pipes is directly below the switch socket. When punching holes, calculate the position to avoid damage

installation of skirting line, step 4. After the construction of the ground and wall, before the installation of the skirting line, the position of the skirting line should be reserved when laying the floor on the ground. Before the installation of the skirting line, remove the small wooden blocks in the reserved position, and then clip the skirting line of suitable length into the reserved joint

installation of skirting line, step 5. After fixing the skirting line, the installation of the skirting line is roughly completed. At this time, we only need to deal with the corners of the installed skirting line. Generally, for the skirting line at the corner, the edge of the corner will be cut into a 45 degree angle and then assembled and fixed. The effect of this treatment makes the skirting line still natural and beautiful at the corner

I'll introduce the installation of skirting line here. I hope it can help you. More decoration information is available. Please look forward to it

长春外阴白斑医院

郑州风湿医院

成都哮喘医院

Copyright © 2011 JIN SHI